Waterproofing Membranes

Back to Waterproofing Membranes

Data Sheet

Safety Data Sheet

Warranties

Coverages/Packaging

5 gallon pail, 36 pails per pallet

1 gallon pails, 4 x 1 gallon pails per carton

80 sq. ft. at 30 – 35 mil. wet film thickness – single coat crack isolation application.

50 sq. ft. at 20 – 25 mil. wet film thickness – two coat waterproofing application

PROFLEX® HYDRA-SEAL®

PROFLEX® HYDRA-SEAL® is a thin, load bearing, crack isolation, waterproof membrane, it provides a monolithic transition for crack-isolation and waterproofing applications. The material is installed in a semi-fluid state and can be applied to most shapes or irregular form such as base flashings, walls, etc.

Advantages

Single component, cold applied
Non-flammable
Moisture vapor resistant up to 10 lbs./1000sq.ft-24hrs. CaCl Test
Bonds directly to metal, PVC and ABS plumbing fixtures only
Thin; only 40 mil. thick when fully cured
Anti-fracture protection up to 1/4″ over shrinkage and other non-structural cracks
Exceeds ANSI A118.10 and A118.12
Safe – no solvents and non-flammable
Install tile, brick and stone directly onto membrane