LIBERTY PRIMER
Suitable Surfaces
Concrete, cementitious backer units (CBU or cement board), exterior grade plywood, oriented strand board (OSB), adhesive residue (except tacky or pressure- sensitive adhesive), cold-rolled steel, existing VCT, LVT or non-cushioned sheet goods if they are single layer only and well bonded to a substrate approved for flooring, gypsum- based substrates — minimum tensile bond strength 72 psi (0.5 MPa).
Packaging
1-Gallon (3.8 L) jugs, 4 x 1gallons jugs per carton, 45 cartons/pallet (180 units)
5-Gallon (18.9 L) pails, 36 pails/pallet
PROFLEX LIBERTY PRIMER is a premium multi-functional acrylic emulsion primer for use with PROFLEX brand self-leveling underlayments, patches, and setting mortars. Enhances and enable the bonding of other PROFLEX brand surface preparation products and polymer-modified mortars to difficult substrates such as
metal, glazed ceramic tile, gypsum-based underlayments and concrete treated with certain well bonded silicate or acrylic
resin curing compounds and well bonded epoxy coatings. Use to prime resin and metal backings on natural stone and
install with polymer-modified mortar instead of epoxy mortar. For peel and stick tile installation, primer can be used on
dry, porous concrete, gypsum cement underlayments and plywood. Use to enhance and promote bond over cold-rolled
steel substrates.
Advantages
• Premium, multi-functional primer for all approved porous and non-porous substrates
• Easy to apply with brush or roller for non-porous surfaces, or push broom for porous surfaces
• Enables installation of ceramic tile or natural stone directly to metal, gypsum- based underlayments, glazed tile
(without scarifying) and well bonded epoxy coatings
• Contributes to LEED® project points
• Solvent-free
• VOC = 0