Waterproofing Membranes
Coverages/Packaging
5 gallon pail, 36 pails per pallet
1 gallon pails, 4 x 1 gallon pails per carton
80 sq. ft. at 30 – 35 mil. wet film thickness – single coat crack isolation application.
50 sq. ft. at 20 – 25 mil. wet film thickness – two coat waterproofing application
PROFLEX® HYDRA-SEAL®
PROFLEX® HYDRA-SEAL® is a thin, load bearing, crack isolation, waterproof membrane, it provides a monolithic transition for crack-isolation and waterproofing applications. The material is installed in a semi-fluid state and can be applied to most shapes or irregular form such as base flashings, walls, etc.
Advantages
- Single component, cold applied
- Non-flammable
- Moisture vapor resistant up to 10 lbs./1000sq.ft-24hrs. CaCl Test
- Bonds directly to metal, PVC and ABS plumbing fixtures only
- Thin; only 40 mil. thick when fully cured
- Anti-fracture protection up to 1/4″ over shrinkage and other non-structural cracks
- Exceeds ANSI A118.10 and A118.12
- Safe – no solvents and non-flammable
- Install tile, brick and stone directly onto membrane